We dug around but couldn't find the page you're looking for.
Try our Home Page
404 Error
Page not found
1025R
Sub-Compact Utility Tractor
- Powerful Tier 4-compliant diesel engine
- New, easy-lift hood with dual gas-charged lift struts
- Premium Operator Station with ergonomic seat, armrests and fender lights
- Auto-Connect™ mid-mower deck can be installed or removed in less than 5 minutes
STARTING AT:
$13,504.00
View Product Brochure View Attachments & Implements Brochure
Features
Expand AllCollapse All
1025R Tractor
Implement compounding (1025R Tractor shown)
Gas-lift spring
Twin Touch foot controls 
Two-speed transmission
Open operator's station
Operator presence system
Foldable Roll-Gard ROPS 
Standard (and optional) lighting shown
1025R Cab – LP68087
iMatch Quick-Hitch
iMatch Quick-Hitch with rotary cutter hookup
iMatch Quick-Hitch (LVB25976)
iMatch Quick-Hitch with rotary cutter hookup (LVB25976)
Mower deck lift components
1025R Tractor- All 1 Family Tractors include factory-installed mechanical deck lift components.
- The addition of these components from the factory significantly reduces the time required to do the initial mower deck installation at the time of purchase.
- Refer to the mowers and material collection page for more details on mower deck installation and compatibility.
Implement compounding improves efficiency
Implement compounding (1025R Tractor shown)- Allows mounting more than one implement at a time, eliminating implement changeover
- Loader, mid mower, backhoe, and a variety of 3-point hitch implements can be attached to the tractor at the same time
Easy-open, gas-lift hood
Gas-lift spring- The under-hood gas-lift support provides easy one-finger access to the engine compartment and eliminates the need for a mechanical prop rod.
- This design of the support structure provides excellent rigidity for the hood.
Hydrostatic transmission (HST) with Twin Touch™ foot controls
The 1023E and 1025R Tractors feature a HST.
- Fluid under pressure transmits engine power to the drive wheels through a hydraulic pump and motor
- The hydrostatic-drive unit functions both as a clutch and transmission
Twin Touch foot controls Twin Touch foot controls allow selecting both speed and direction of travel with a touch of the toe. Ideally suited for jobs where productivity is a must, such as loader or mower applications.
- Infinite ground speeds, even at full throttle, to match the job
- No clutching for fast direction changes
- Faster, easier, and more precise to operate than competitive tractors with treadle pedal design (toe-heel)
- Provides high torque for start up
- Reduces power train shock loads
- Large foot pedals were designed for operator comfort and allow for convenient operation of the tractor
Two-speed transmissionTransmission has two speeds - Hi and Lo range.
- The range lever is located next to the seat, conveniently within reach of the operator
- Lo range allows performing tougher tasks at higher speeds than competitive tractors equipped with a three-range transmission (that is, lo range on three-speed transaxle is slower than lo range on a two-speed transaxle)
Durability features include:
- Large forged one-piece trunnion shaft with larger support bearings that reduce vibration and noise.
- Innovative transaxle combines an HST, gear reduction axle, and clutch.
- Pressure side filtration allows using a finer-mesh filter (10 micron) than suction filtration systems use on many competitive tractors.
- One pump to supply charge pressure and implement flow. A flow divider splits the flow to various circuits throughout the tractor.
- The transaxle has an oil cooler which provides improved hydraulic cooling performance.
Open operator's station is comfortable and convenient
Open operator's stationThe 1025R operator's station has been designed to allow greater operator comfort and increased visibility. Large and easy to grab handrails are located on each fender for an easier on and off of the tractor from either side.
- Sloping hood design provides improved visibility
- Operator's station provides plenty of room for comfortable operation
- Step-through textured flat operator station makes getting on and off the tractor easy from either side of the tractor
- Fender-mounted handrails are large and easy to grab; located on each fender, they assist the operator in getting on and off the tractor
- Controls are located next to the fenders for operator convenience
- Operator controls are color-coded for easy identification of operation
- Front-horizontal exhaust for increased operator visibility
*Features shown are available with all current model year tractors.
Operator presence system- If the operator leaves the tractor seat when the transmission, mid or rear power take-off (PTO) is engaged, the engine will shut down
Foldable Roll-Gard ROPS Foldable Roll-Gard™ rollover protective structure (ROPS) and retractable-seat belt are standard equipment to protect the operator in the event of a tractor tip-over, as well as improve the ability to store tractor in a garage.
Seat belt is within easy reach of the operator, to encourage the use of it whenever operating the tractor.
*Features shown are available with all current model year tractors
Lighting
Standard (and optional) lighting shownStandard equipment lighting includes:
- Two front-mounted sealed-beam halogen headlights
- Two amber-flashing warning/hazard lights mounted on the side of the ROPS with reflectors
- Two additional fender lights are standard on the 1025R
- Additional front- and rear-light kits are available
*Features shown are available with all current model year tractors
Optional cab offers protection from elements
The field-installed cab offers protection from the elements and expands the versatility of 1025R Tractors to perform in all climates.
1025R Cab – LP68087Key features:
- Full glass doors for maximum visibility
- Curved glass for a styled look
- Sealed for cold weather operation
- Easily removable for summer operation
- Heater with fan
- Switches and vents integrated into headliner
- Dome light
- Fully openable front and rear windows with gas struts
- Front sun visor
- Front work lights
- Front wiper with washer system
- Dual outside mirrors
- Rollover protective structure (ROPS) certified cab frame
- Allows for improved rear visibility
- Reduces overall height
- Rubber isolation at all mounting points
- Interior sound insulation
- Immersion-primed and powder-coated cab frame
- Provides superior corrosion resistance
- Integrated John Deere styling
Specifications:
- Cab height: 1525 mm (60 in.)
- Overall height when installed: 1990 mm (78.4 in.)
- Overall height when installed to top of beacon: 2159 mm (85 in.)
- Overall width with cab installed: same as tractor width
- Cab weight: 200 kg (440 lb)
Optional kits:
- Rear wiper kit – LP68115
- Stereo kit – LP68120
- Beacon light kit – LP68116
- Light-emitting diode (LED) rear work light kit – LP68117
- Illuminated license plate kit – LP68118
- Retro-fit kit – LP68119
- Required for all 1026R Tractors. Also required for 1025R Tractors built prior to calendar year 2016. Calendar year 2016 machines will have a G in the 10th position of the serial number.
- NOTE: Any tractor that does not have the gas-lift struts on the hood will require this retro-fit kit.
Compatibility and Installation:
- Compatible with:
- 1025R
- 1026R
- Not compatible with:
- 1023E
- 1025R TLB (FILB)
- 1026R TLB (FILB)
- Compatible with all tractor implements except 260 Backhoe.
- Cabs will be shipped direct to the dealership and installed by a service technician.
- Estimated installation time is 7-8 hours.
Optional iMatch™ Quick-Hitch feature allows for easy implement hookup
iMatch Quick-HitchiMatch Quick-Hitch with rotary cutter hookupiMatch Quick-Hitch (LVB25976)iMatch Quick-Hitch with rotary cutter hookup (LVB25976)One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.
The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the ASABE Category 1 Standard S278.6 for quick-attach hitches.
- All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.
NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).
- Upper bushing
- Inside diameter: 1.93-1.95 cm (0.76-0.77 in.)
- Outside diameter: 3.15-3.18 cm (1.24-1.25 in.)
- Lower bushings
- Inside diameter: 2.24-2.26 cm (0.88 to 0.89 in.)
- Outside diameter: 3.63-3.66 cm (1.43 to 1.44 in.)
Specs
Specifications
Add Model
Specifications | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere1025RSub-Compact Utility Tractor |
Engine
| Family | EYDXL1.27NS1 FYDXL1.27NS1 GYDXL1.27NS1 | |||
|---|---|---|---|---|
| Manufacturer | Yanmar | |||
| Engine model | 3TNV80F-NCJT | |||
| Engine power (gross) | 17.8 kW 23.9 hp 24.2 PS SAE J1995 rated power | |||
| Power take-off (PTO) power | 13.4 kW 18 hp | |||
| Rated engine speed | 3200 rpm | |||
| Type | Diesel | |||
| Injection pump type | Indirect Injection | |||
| Aspiration | Natural | |||
| Emissions compliance | Final Tier 4 | |||
| Cylinders/displacement | 3 / 1.267 L 3 / 77.3 cu in. | |||
| Number of cylinders | Three | |||
| Cylinder liners | Cast-in-block | |||
| Bore and stroke | 80x84 mm 3.15x3.31 in. | |||
| Compression ratio | 23.0:1 | |||
| Lubrication | Pressurized | |||
| Cooling system | Water pump | |||
| Air cleaner | Dual element with mechanical restriction indicator | |||
| Engine torque at rated speed | 55.2 Nm 40.7 lb-ft | |||
| Fuel tank capacity | 21.2 L 5.6 U.S. gal. |
Electrical
| Battery size | 500 CCA | |||
|---|---|---|---|---|
| Alternator (12-V) | 40 amp | |||
| Starter size | 1.2 kW 1.6 hp |
Fuel system
| Type | Indirect Injection | |||
|---|---|---|---|---|
| Fuel consumption | 5.8 L/hr 1.5 U.S. gal./hr |
Transmission
| Standard transmission; forward/reverse | Hydrostatic - 2 range | |||
|---|---|---|---|---|
| Optional transmission; forward/reverse | ||||
| Left-hand reverser | No | |||
| Transmission gear ranges | ||||
| Final drive | Bull Gear | |||
| Brakes | Wet disc (left-hand pedal) | |||
| Steering | Power | |||
| Clutch, wet/dry | N/A | |||
| Clutch disk diameter wet clutch | ||||
| Axle capacity | Front 612 kg 1349 lbRear 715 kg 1576 lb | |||
| Creeper | No | |||
| Cruise control | Standard | |||
| Differential lock | Yes | |||
| Drawbar maximum vertical load |
Hydraulics
| Type | Open center | |||
|---|---|---|---|---|
| Pump rated output | Steering 10.8 L/min 2.8 gpmImplement 13.2 L/min 3.5 gpm 24 L/min 6.3 gpm | |||
| Pump type | Gear | |||
| Maximum operating pressure | 137.9 bar 2000 psi | |||
| Draft control sensing | Position control | |||
| Remote control valves available | Two |
3-point hitch
| Category | Limited Category 1 | |||
|---|---|---|---|---|
| Lift capacity, 24-in. behind link arms | 309 kg 681 lb |
Power take-off (PTO)
| Standard | Rear - 540 rpm Mid - 2100 rpm | |||
|---|---|---|---|---|
| Optional | ||||
| Control | Independent | |||
| Clutch | Wet disc | |||
| Brake (for mid and rear PTO) | Wet disc | |||
| Engagement method |
Fluid capacities
| Crankcase with filter | 2.7 L 2.9 qt | |||
|---|---|---|---|---|
| Transmission and hydraulic system | 3.7 gal. 14 L |
Final drive
| Type | Bull Gear | |||
|---|---|---|---|---|
| Differential lock | Yes |
Operator station
| Rollover protective structure | Type Foldable Yes | |||
|---|---|---|---|---|
| Platform - flat/straddle | One-piece semi flat | |||
| Gear shift location - console/floor | Left-hand side |
Cab
| Compliance | NA | |||
|---|---|---|---|---|
| Visibility | NA | |||
| Air conditioning, temperature differential | NA | |||
| Doors | NA | |||
| Noise rating | NA | |||
| Seat equipment | NA |
Dimensions
| Wheelbase | 145 cm 57.1 in. | |||
|---|---|---|---|---|
| Front axle clearance | 195 mm 7.7 in. | |||
| Turning radius with brakes | ||||
| Turning radius without brakes | 2.25 m 7.4 ft | |||
| Limited slip differential | No | |||
| Approximate shipping weight (open-station; cab) | 655 kg 1444 lb |
Tires
| Front | R4 - 18x8.5-10 | |||
|---|---|---|---|---|
| Rear | R4 - 26x12-12 | |||
| Front tread range | 91.8 cm 36.1 in. | |||
| Rear tread spacing |
Miscellaneous
| Toolbox | Yes | |||
|---|---|---|---|---|
| Tilt steering wheel | ||||
| 12-V Outlet |
Additional information
| Date collected |
|---|
Accessories and Attachments
Try our Home Page
CUSTOMER REVIEWS
No reviews have been created.